1) Take down the air filter
At the slot of surface panel to open an angle, pull the air filter downward and take it out.
Filter Care and Maintenance
Click an image to expand
2) Cleaning
To clean the dust adhering to the filters, you can either use a vacuum cleaner, or wash them with warm water. The water with the neutral detergent should be below 45°C. When the filters are very dirty, such as oil stain, wash and dry it in the shade.
NOTE: Never use water above 45°C to wash, or it can cause deformation or discoloration. Never parch it by fire, or it can cause a fire or deformation.
3) Reinsert the filters
Reinsert the filters along with the arrow head, then cover the surface panel and clasp it.
Check before use
- 1)Be sure that nothing obstructs the air outlet and intake vents.
- 2)Check that whether ground wire is properly connected or not.
- 3)Check that whether the batteries of air conditioner are changed or not.
- 4)Check whether the installation stand of the outdoor unit is damaged or not. If damaged, please contact the dealer.
Maintain after use
- 1)Turn main power off.
- 2)Clean the filter and indoor and outdoor units bodies.
- 3)Repaint the rubiginous place on the outdoor unit to prevent it from spreading.
